•
UV, or ultraviolet radiation is part of the invisible light spectrum
that falls between 100 and 400 nm (nanometers).
• UV is divided into three ranges: UV-A, UV-B and UV-C. UV-C,
the range below 280 nm. Is not considered a threat because most
of it is filtered by the earth’s protective ozone layer.
• High exposure to UV-A and UV-B rays can cause significant
eye damage, ranging from temporary discomfort to long-term vision
problems such as cataracts. |
 |
Clear
General purposes for indoor applications that require impact protection.
Provides 99% protection from harmful UV-A and UV-B rays. |
 |
Gray
Commonly used in outdoor applications, offers protection from excessive
glare and high levels of harmful UV-A and UV-B rays. |
 |
Green
Commonly used in outdoor applications, offers protection from excessive
glare and high levels of harmful UV-A and UV-B rays. |
 |
Coffee
Commonly used in outdoor applications, offers protection from excessive
glare and high levels of harmful UV-A and UV-B rays. Best for enhancing
depth perception. |
 |
Sun
Block Bronze
Bronze colored lens blocks the blue light of the spectrum, offers
brighter view on cloudy, hazy or foggy days. |
 |
Amber
Commonly used in indoor, low-light applications. Enhances contrast. |
 |
Vermillion
Offers the highest contrast and best low-light image resolution. |
 |
Infinity
Blue
Commonly used in indoor applications where there is an excessive amount
of yellow or sodium vapor light. Offers a high-level of contrast. |
 |
Indoor/Outdoor
Clear UV400 Polycarbonate lens provides 100% protection from harmful
UV-A and UV-B rays. Coated with a light gold mirror finish to reduce
glare. Commonly used where it is required to move between indoor applications
to outdoor applications. |
 |
Blue
Mirror
Gray polycarbonate lens with blue mirror coating. Commonly used in
outdoor applications. Reduces glare. |
 |
Silver
Mirror
Gray polycarbonate lens with blue mirror coating. Commonly used in
outdoor applications. Reduces glare. |
 |
Gold
Mirror
Gray polycarbonate lens with blue mirror coating. Commonly used in
outdoor applications. Reduces glare. |
 |
3.0
IR Filter
Commonly used around welding sites or for light brazing or cutting. |
 |
5.0
IR Filter
Commonly used around welding sites or for medium to heavy cutting
and medium to heavy gas welding. |
| This
information is provided “as is” and is not to be considered
a warranty of product performance or as an authoritative informational
page. Due to the diverse field conditions and other variables which
can affect a product’s performance, Flame Tamers disclaims all
warranties (expressed and implied) as to any product’s performance
or any information provided. |
